# Google Ads Seasonality Adjustments: How to Use Them Properly

> Most advice on seasonality adjustments cites the wrong menu and an invented "+35% boost." Here's what they actually do, where they really live, and when not to touch them.

**By Murtaza Rangwala** · **Published:** Nov 11, 2026 · **Read time:** 7 min read · **Category:** Bidding

Search "Google Ads seasonality adjustments" before a big sale and you'll find two things repeated everywhere: a setup path that no longer exists, and a confident number like "+35% conversion rate" presented as if it applies to everyone. Both are wrong, and acting on either can quietly cost you money during the one period where mistakes are most expensive.

So here's the accurate version, checked against Google's current documentation. What the tool does, where it actually lives, the number you should enter, and the situations where the right move is to leave it alone.

The TL;DR

A seasonality adjustment tells Smart Bidding to expect a short-term change in your conversion rate for an event of about one to seven days. You enter your own realistic estimate of that change; there is no universal figure. It lives at Tools → Budgets and bidding → Adjustments → Seasonal, not under any "advanced bid strategies" menu. Most of the time you don't need one, because Smart Bidding already anticipates recurring seasonality. Use it only when you expect a genuinely unusual swing in conversion rate, keep it short, and never confuse it with a data exclusion, which is for broken tracking, not promotions.

## What a seasonality adjustment actually does

It adjusts the **conversion rate Smart Bidding expects** during a window you define. That's the whole function. If you're running a flash sale and you know, from experience, that your conversion rate roughly jumps during it, you tell the system to anticipate that jump so it bids more confidently from the start rather than waiting to learn mid-sale.

[Chart: Chart showing conversion rate rising during a sale window; with a seasonality adjustment, bidding is ready from the first day, whereas without one it catches up only after the system learns mid-sale.]

*With an adjustment, bidding leans in from the first hour of the sale. Without one, it spends the early part of the window learning that conversion rates jumped — and can over-correct afterwards.*

Two things follow from that definition, and both matter.

First, it's a **conversion-rate** lever, not a traffic lever. If you simply expect more people searching, that's volume, and you handle volume with budget. Seasonality adjustments are for when the *rate at which visitors convert* changes, not the number of them.

Second, when the event ends, Smart Bidding returns to normal on its own. You don't need to enter a negative adjustment afterwards to "undo" it.

## Where it actually lives

The correct, current path is:

**Tools → Budgets and bidding → Adjustments → Seasonal tab → the blue + → Adjustment type: Conversion rate.**

From there you set the campaigns, the date and time range, and your estimated conversion-rate change. If a guide tells you to look under "Shared library" or "advanced bid strategies," it's describing an old interface. The feature supports Search, Shopping, Display, Demand Gen and Performance Max; it doesn't apply to Travel campaigns.

## The number you enter is yours

This is the part the internet gets most wrong. Google's own help uses an example figure purely to illustrate the field. It is not a recommendation. A "+35%" or "+50%" you read somewhere is someone else's illustration, or an outright guess.

Your estimate should come from your own data: how did your conversion rate behave during the same sale last year, or during comparable promotions? If you genuinely don't know, that's a strong signal you may not need an adjustment at all.

A seasonality adjustment is you telling Google something specific and true about your business. If you're copying a number off a blog, you're not telling it anything true.

## When NOT to use one

Reaching for the tool by default is the common error. Google is clear that Smart Bidding already accounts for recurring seasonal events, so reserve adjustments for the exceptions. The clearest way to decide is a short decision tree.

[Chart: Decision tree: use a seasonality adjustment only for a short 1 to 7 day event where you expect an unusual conversion-rate change and can estimate it from your own data; otherwise skip it.]

*Three honest questions. If you can't answer "yes" to all three, you almost certainly don't need an adjustment.*

- **Don't** use one for routine or regular fluctuations. The system handles those.

- **Don't** use one for long periods. They're built for one to seven days and work poorly stretched beyond about two weeks. A six-week "holiday adjustment" is a misuse.

- **Don't** use one just because you expect more traffic. That's budget's job, which ties into why more budget stops working past a point if the underlying signal isn't there.

- **Don't** use one to paper over uncertainty. If you can't estimate the conversion-rate change with a straight face, skip it.

[Chart: Bar chart of event length versus suitability: 1 to 7 days is ideal, 8 to 14 days is weaker, 15 or more days is not recommended.]

*Built for brief events. Past about two weeks, the tool works poorly — handle long seasons through normal bidding and budgets instead.*

## Seasonality adjustments vs data exclusions

These two sit in the same part of the interface and get confused constantly. They do opposite jobs.

| | Seasonality adjustment | Data exclusion |
| --- | --- | --- |
| **Purpose** | Tell bidding to expect a conversion-rate change | Tell bidding to ignore a period of bad data |
| **When** | Before/around a known short event | After a tracking outage or site issue |
| **Direction** | Forward-looking estimate | Backward-looking correction |
| **Typical use** | A flash sale or promo | A broken tag, downtime, double-counting |

If your conversion tracking breaks during Black Friday and logs garbage, the fix is a **data exclusion** so Smart Bidding doesn't learn from the corrupted period. Apply it quickly; it's not recommended for issues older than about 14 days on Search and Display. Reaching for a seasonality adjustment there would make things worse, because you'd be telling the system to trust a period it should ignore.

## A short, honest example

A composite from the ecommerce accounts I've run, not a single client. A homeware brand runs a 48-hour flash sale twice a year. The first year, no adjustment: Smart Bidding spent the first several hours cautiously, effectively learning that conversion rates had jumped, and only got aggressive once the sale was half over.

The second year, we added a seasonality adjustment for the exact 48-hour window, with a conversion-rate estimate based on the previous sale's actual behaviour, not a number off the internet. Bidding leaned in from the first hour instead of the middle. The lesson wasn't a magic percentage; it was that a short, well-estimated window beat both "do nothing" and "guess high."

## Common mistakes

- **Copying a percentage from a blog.** The estimate must be yours, from your data.

- **Using the old menu path.** It's under Budgets and bidding → Adjustments → Seasonal now.

- **Running long adjustments.** Keep them to the one-to-seven-day sweet spot.

- **Using one for a traffic spike.** That's budget, not conversion rate.

- **Confusing it with a data exclusion.** Promos get adjustments; broken tracking gets exclusions.

## Bottom line

- A seasonality adjustment is a short-term, conversion-rate signal you estimate from your own data.

- Find it at Tools → Budgets and bidding → Adjustments → Seasonal.

- Use it only for genuinely unusual, short conversion-rate swings. Most events don't need one.

- Handle extra traffic with budget, and broken tracking with data exclusions.

Used well, it's a precise little tool for a narrow job. Used the way most of the internet describes it, with a borrowed number and the wrong menu, it's just noise you've added to your bidding before your biggest sale.

If you're not sure whether your peak events actually warrant one, that's exactly the kind of thing I check in a [free account audit](https://www.murtazarangwala.com/#audit). For hands-on help through peak, see my [Google Ads management service](https://www.murtazarangwala.com/services/google-ads-management).

## Sources and further reading

[About seasonality adjustments — Google Ads Help](https://support.google.com/google-ads/answer/10369906)

[Create a seasonality adjustment — Google Ads Help](https://support.google.com/google-ads/answer/9352512)

[About data exclusions — Google Ads Help](https://support.google.com/google-ads/answer/10370710)

[Use data exclusions for conversion data outages — Google Ads Help](https://support.google.com/google-ads/answer/10276486)

---

**Tags:** 

## About the author

Murtaza Rangwala is a senior independent Google Ads consultant. 8 years, 1,900+ campaigns shipped, $250M+ in client revenue generated. Independent practice capped at four concurrent clients.

- More posts: https://www.murtazarangwala.com/blog
- Book a 30-min call: https://calendly.com/murtaza_rangwala/30min
- Free Google Ads audit: https://www.murtazarangwala.com/#audit